Manifold Hot Tub Spa 2" spg x Dead End x (10) 3/4" Coupler Base Kit Video How to

See the Informational videos here first. This part is a 2" Spigot X Dead End X (6) 3/4" Barbs + 2" Street x Slip x (4) 3/4" Barb Manifold Basic Replacement Kit. The Kit consists of the Manifold with (6) 3/4" Barbs & a Manifold with (4) 3/4" Barbs, (1) Plugs for 3/4" Barb, a 2" Coupler, 6" of 2" Soft Pipe. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. The Manifold receives a 2" pipe or fitting on one side and then slips inside of the other manifold and then a 2" fitting glues in on the other side. This part used in newer hot tubs and features. For a Video about Manifold parts go to YOUTUBE and look for "Spa Hot Tub Barb Style Manifolds The Hot Tub Professor" or " Spa Freeze Damage Repair Manifolds Leak Hot Tub Professor How To Video" or "Spa Hot Tub Flex Pipe Glue In Style Water Manifolds The Hot Tub Professor"

• Spa Hot Tub Water Base Manifold Kit 2" x (4) 3/4" Barb + 2" X (6) 3/4" Barb Dead End..
• Accepts 2" PVC Pipe which measures about 2 3/8" OD..
• (10) 3/4" Ribbed Barbs that accept 3/4" ID Tubing..
• For a Video about Manifold parts go to YOUTUBE and look for "Spa Hot Tub Barb Style Manifolds The Hot Tub Professor" or " Spa Freeze Damage Repair Manifolds Leak Hot Tub Professor How To Video" or "Spa Hot Tub Flex Pipe Glue In Style Water Manifolds The Hot Tub Professor"
• Comes with (1) 3/4" Barb Plug to block of unused outlets..